Add full monorepo: virtual-banker, backend, frontend, docs, scripts, deployment

Co-authored-by: Cursor <cursoragent@cursor.com>

VMID_6000_NETWORK_FIX.md

@@ -0,0 +1,105 @@
+# VMID 6000 Network Fix - Complete
+
+**Date**: 2026-01-22  
+**VMID**: 6000 (fabric-1)  
+**IP Address**: 192.168.11.113  
+**Status**: ✅ **FIXED** (temporary) | ⚠️ **RESTART REQUIRED** (persistent)
+
+---
+
+## Problem
+
+VMID 6000 was showing "Network is unreachable" after IP reassignment from 192.168.11.112 to 192.168.11.113.
+
+---
+
+## Root Cause
+
+1. **Interface State**: `eth0` was in state `DOWN`
+2. **Missing IP**: No IPv4 address assigned to `eth0` (only IPv6 link-local)
+3. **No Default Route**: Gateway route was missing
+
+---
+
+## Fix Applied
+
+### Step 1: Bring Interface UP
+```bash
+pct exec 6000 -- ip link set eth0 up
+```
+✅ **Result**: Interface is now UP
+
+### Step 2: Assign IP Address
+```bash
+pct exec 6000 -- ip addr add 192.168.11.113/24 dev eth0
+```
+✅ **Result**: IPv4 address assigned
+
+### Step 3: Add Default Route
+```bash
+pct exec 6000 -- ip route add default via 192.168.11.1 dev eth0
+```
+✅ **Result**: Default route configured
+
+---
+
+## Current Status
+
+### Interface Status
+- ✅ `eth0` is UP
+- ✅ IPv4 address: 192.168.11.113/24 assigned
+- ✅ Default route: via 192.168.11.1
+
+### Connectivity
+- ✅ Gateway (192.168.11.1): Reachable
+- ⚠️ **Note**: This fix is temporary - IP assignment will be lost on container restart
+
+---
+
+## Persistent Fix Required
+
+The IP address assignment is temporary. For a persistent fix, the container needs to be restarted so Proxmox applies the network configuration from `pct config`.
+
+### Recommended Action
+
+```bash
+# On Proxmox host (r630-01)
+pct stop 6000
+pct start 6000
+```
+
+After restart, Proxmox will automatically:
+- Bring the interface UP
+- Assign the IP address (192.168.11.113/24)
+- Configure the default route (via 192.168.11.1)
+
+---
+
+## Verification
+
+After restart, verify:
+```bash
+# Check interface
+pct exec 6000 -- ip addr show eth0
+
+# Check routing
+pct exec 6000 -- ip route show
+
+# Test connectivity
+pct exec 6000 -- ping -c 2 192.168.11.1
+```
+
+---
+
+## Summary
+
+**Status**: ✅ **TEMPORARY FIX APPLIED**
+
+- Interface is UP
+- IP address assigned
+- Gateway reachable
+- **Action Required**: Restart container for persistent fix
+
+---
+
+**Next Step**: Restart VMID 6000 to make the network configuration persistent.