loc_az_hci/docs/temporary/VM_STATUS_REPORT.md

VM Status Report

Current Status

VM Creation: ✅ COMPLETED

All 4 VMs have been created and are running:

• ✅ cloudflare-tunnel (ID: 100) - Running
• ✅ k3s-master (ID: 101) - Running
• ✅ git-server (ID: 102) - Running
• ✅ observability (ID: 103) - Running

Configuration Status: ⚠️ PARTIAL

Issues Identified:

• Network interfaces (net0) may need manual configuration
• Disk storage (scsi0) configured but may need verification
• ISO/CD-ROM (ide2) may need manual attachment
• Boot order needs verification

Note: Some Proxmox API parameter format issues prevent full automation. Manual verification via Proxmox Web UI is recommended.

OS Installation: ❌ NOT STARTED

• VMs are created but Ubuntu 24.04 has not been installed yet
• VMs are not reachable via network (expected until OS is installed)

Next Steps (In Order)

Step 1: Verify VM Configuration via Proxmox Web UI

Status: ⏳ PENDING

1. Access Proxmox: https://192.168.1.206:8006
2. For each VM (100, 101, 102, 103):
   • Open VM → Hardware
   • Verify:
     • Network device exists and is connected to vmbr0
     • Hard disk exists with correct size
     • CD/DVD drive has Ubuntu ISO attached
     • Boot order is set to CD-ROM first
   • Fix any missing configurations manually

Step 2: Install Ubuntu 24.04 on Each VM

Status: ⏳ PENDING

1. For each VM:
   • Open VM → Console
   • Boot from Ubuntu ISO
   • Complete installation:
     • Use static IP addresses:
       • VM 100: 192.168.1.60/24, gateway 192.168.1.254
       • VM 101: 192.168.1.188/24, gateway 192.168.1.254
       • VM 102: 192.168.1.121/24, gateway 192.168.1.254
       • VM 103: 192.168.1.82/24, gateway 192.168.1.254
     • Create user account (remember credentials for SSH)
     • Complete installation

Step 3: Verify OS Installation

Status: ⏳ PENDING

Run verification script:

./scripts/check-vm-status.sh

This will check:

• Network connectivity
• SSH availability
• Ubuntu installation verification

Step 4: Run Setup Scripts (After OS Installation)

Status: ⏳ PENDING

Only proceed after Step 3 shows all VMs are ready.

For each VM:

1. Copy setup script to VM
2. SSH to VM
3. Run setup script with sudo

Cloudflare Tunnel VM (192.168.1.60):

scp scripts/setup-cloudflare-tunnel.sh user@192.168.1.60:/tmp/
ssh user@192.168.1.60
sudo bash /tmp/setup-cloudflare-tunnel.sh

K3s VM (192.168.1.188):

scp scripts/setup-k3s.sh user@192.168.1.188:/tmp/
ssh user@192.168.1.188
sudo bash /tmp/setup-k3s.sh

Git Server VM (192.168.1.121):

scp scripts/setup-git-server.sh user@192.168.1.121:/tmp/
ssh user@192.168.1.121
sudo bash /tmp/setup-git-server.sh

Observability VM (192.168.1.82):

scp scripts/setup-observability.sh user@192.168.1.82:/tmp/
ssh user@192.168.1.82
sudo bash /tmp/setup-observability.sh

Verification Commands

Check VM Status in Proxmox:

./scripts/check-vm-status.sh

Check VM Configurations:

# Via Proxmox Web UI or API
# Access: https://192.168.1.206:8006

Test VM Connectivity:

for ip in 192.168.1.60 192.168.1.188 192.168.1.121 192.168.1.82; do
  ping -c 1 -W 2 $ip && echo "$ip: ✓ Reachable" || echo "$ip: ✗ Not reachable"
done

Troubleshooting

If VMs don't boot:

1. Check VM hardware configuration in Proxmox Web UI
2. Verify ISO is attached to CD/DVD drive
3. Check boot order (should be CD-ROM first)
4. Verify VM has sufficient resources

If network configuration fails:

1. Manually configure network in Proxmox Web UI
2. Ensure network bridge (vmbr0) exists
3. Check VLAN configuration if needed

If setup scripts fail:

1. Verify Ubuntu is fully installed
2. Check network connectivity
3. Ensure user has sudo privileges
4. Review script logs for specific errors

Progress Tracking

• VMs created
• Configuration fixes attempted
• VM configurations verified manually
• Ubuntu installed on all VMs
• OS installation verified
• Setup scripts executed
• Services configured and running