docs/00-meta/TASK_CHECK_REPORT.md

# Task Check Report — Remaining Tasks Verified Before Completion

**Date:** 2026-03-02  
**Purpose:** For each remaining task, verify current state before marking complete or executing. Use this report to decide what still needs to be run by Operator/LAN vs what is already satisfied.

---

## Checks run (2026-03-02)

| Check | Result |
|-------|--------|
| **run-completable-tasks-from-anywhere.sh** | Passed — config OK, 59/59 on-chain (Chain 138), validation OK, reconcile-env printed |
| **preflight-chain138-deploy.sh** | Passed — dotenv exists, RPC Core (chainId 138), nonce consistent, no stuck txs |

---

## Per-task status (after check)

### 1. Full deployment order (Phase 0–6)

| Item | Status | Notes |
|------|--------|-------|
| Phase 0 (prereqs) | Satisfied | Preflight passed; .env and RPC OK |
| Phase 1 (Chain 138 core) | Done | 59/59 contracts present |
| Phase 2 (TransactionMirror + PMM pools) | Done | Mirror deployed; all three pools created (cUSDT/cUSDC, cUSDT/USDT, cUSDC/USDC) |
| Phase 3 (Liquidity + DODOPMMProvider) | Partially done | DODOPMMProvider deployed at `0x8EF6657D2a86c569F6ffc337EE6b4260Bd2e59d0`; pools registered. **Remaining:** add liquidity (optional per doc) via `AddLiquidityPMMPoolsChain138.s.sol` or cast |
| Phase 4–6 | Not run | Optional / other chains; Operator |

**Conclusion:** Phases 0–3 (required) are done except adding liquidity. Full “completion” of Phase 0–6 requires Operator for Phase 4–6 and, if desired, adding liquidity in Phase 3.

---

### 2. Chain 138 PMM: add liquidity, DODOPMMProvider

| Item | Status | Notes |
|------|--------|-------|
| DODOPMMProvider deployed | Done | `0x8EF6657D2a86c569F6ffc337EE6b4260Bd2e59d0`; pools registered (2026-02-28) |
| Pools created | Done | 0x9fcB… (cUSDT/cUSDC), 0xa3Ee… (cUSDT/USDT), 0x90bd… (cUSDC/USDC) |
| Add liquidity | Not run | Script: `smom-dbis-138/script/dex/AddLiquidityPMMPoolsChain138.s.sol`; runbook: [ADD_LIQUIDITY_PMM_CHAIN138_RUNBOOK.md](../03-deployment/ADD_LIQUIDITY_PMM_CHAIN138_RUNBOOK.md). Requires `ADD_LIQUIDITY_BASE_AMOUNT`, `ADD_LIQUIDITY_QUOTE_AMOUNT` in .env and deployer holding base/quote tokens |

**Conclusion:** Provider and pools are in place. Only “add liquidity” remains; Operator/LAN with token balance and .env amounts.

---

### 3. Operator tasks: Blockscout verify, 502 fix, NPMplus backup, deploy

| Item | Status | Notes |
|------|--------|-------|
| Script exists | Yes | `./scripts/run-all-operator-tasks-from-lan.sh` |
| Dry-run | Run | Would run: run-wave0-from-lan.sh (NPMplus RPC fix + backup), then Blockscout verification |
| Requires | LAN, smom-dbis-138/.env (PRIVATE_KEY, NPM_PASSWORD for backup) | Cannot be run from this host without LAN |

**Conclusion:** Script is present and dry-run succeeds. Execution is Operator/LAN only.

---

### 4. Gnosis, Celo, Wemix CCIP bridges

| Item | Status | Notes |
|------|--------|-------|
| Runbook | Exists | [CONFIG_READY_CHAINS_COMPLETION_RUNBOOK.md](../07-ccip/CONFIG_READY_CHAINS_COMPLETION_RUNBOOK.md) |
| Scripts | DeployWETHBridges.s.sol; complete-config-ready-chains.sh; fund-ccip-bridges-with-link.sh | Per runbook |
| Requires | Per-chain RPC, CCIP Router, LINK, WETH9/WETH10, deployer gas (xDAI, CELO, WEMIX) | Operator/LAN |

**Conclusion:** Documented and scripted; not run in this check. Operator/LAN.

---

### 5. LINK support on Mainnet relay

| Item | Status | Notes |
|------|--------|-------|
| Runbook | Exists | [RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK.md](../07-ccip/RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK.md) |
| Requires | Implement option A or B, deploy, fund LINK, set relaySupported for LINK, restart relay | Operator/LAN |

**Conclusion:** Not run. Operator/LAN.

---

### 6. Repos & PRs: Ledger, Trust Wallet, Chainlist, on-ramps

| Item | Status | Notes |
|------|--------|-------|
| Doc | [REPOSITORIES_AND_PRS_CHAIN138.md](REPOSITORIES_AND_PRS_CHAIN138.md) | External submissions; forms/PRs |
| Action | Submit PRs / forms per doc | External / manual |

**Conclusion:** No automated check; external.

---

### 7. PR-ready files: Chainlist, Trust Wallet

| Item | Status | Notes |
|------|--------|-------|
| Chainlist | Present | `docs/04-configuration/pr-ready/eip155-138.json` |
| Trust Wallet | Present | `docs/04-configuration/pr-ready/trust-wallet-registry-chain138.json` |
| README | Present | [pr-ready/README.md](../04-configuration/pr-ready/README.md) with submission steps |

**Conclusion:** Files exist and are PR-ready; submission is external (fork, PR, forms).

---

### 8. E2E flow waves E1–E7

| Item | Status | Notes |
|------|--------|-------|
| Script | Exists | `./scripts/run-e2e-flow-tasks-full-parallel.sh` |
| Dry-run | Run | Lists waves E0–E7; E3 reports CHAIN_138_DODO_PMM_INTEGRATION set, suggests BRIDGE_REGISTRY_ADDRESS for Flow C |
| Execution | Operator/LAN for E0, E2, E4, E5, E6 | Waves include RPC, backup, Blockscout, routing, L2 PMM, bridge UI |

**Conclusion:** Script and dry-run OK; live execution is Operator/LAN for most waves.

---

## Summary

| Task | Checked | Can complete from here? | Action |
|------|--------|--------------------------|--------|
| 1. Full deployment order Phase 0–6 | Yes | No (Phase 4–6 + liquidity = Operator) | Document: Phases 0–3 done; add liquidity + Phase 4–6 = Operator |
| 2. Chain 138 PMM add liquidity | Yes | No (needs tokens + .env amounts) | Operator runs AddLiquidityPMMPoolsChain138 or cast |
| 3. Operator tasks | Yes | No (LAN required) | Operator runs run-all-operator-tasks-from-lan.sh |
| 4. Gnosis/Celo/Wemix CCIP | Yes | No | Operator per runbook |
| 5. LINK Mainnet relay | Yes | No | Operator per runbook |
| 6. Repos & PRs | Yes | No (external) | Submit per REPOSITORIES_AND_PRS_CHAIN138 |
| 7. PR-ready files | Yes | N/A (files exist) | Submit PRs using pr-ready/ files |
| 8. E2E waves E1–E7 | Yes | No (Operator for most) | Operator runs run-e2e-flow-tasks-full-parallel.sh |

**Completed in this environment:** Preflight and run-completable-tasks-from-anywhere passed; no remaining tasks can be fully “completed” from this host without LAN/Operator or external submission.

**Next step for operator:** Run `./scripts/run-all-operator-tasks-from-lan.sh` (and optionally `--deploy`) from a host on LAN; add liquidity when base/quote amounts and tokens are ready; run E2E waves as needed.
-												chore: sync all changes to Gitea

- Config, docs, scripts, and backup manifests
- Submodule refs unchanged (m = modified content in submodules)

Made-with: Cursor

											
										
										
											2026-03-02 11:37:34 -08:00
+								# Task Check Report — Remaining Tasks Verified Before Completion
 								**Date:** 2026-03-02
 								**Purpose:** For each remaining task, verify current state before marking complete or executing. Use this report to decide what still needs to be run by Operator/LAN vs what is already satisfied.
 								---
 								## Checks run (2026-03-02)
 								| Check | Result |
 								|-------|--------|
-												docs: update master documentation and push to Gitea (2026-03-06)

- MASTER_INDEX: Last Updated 2026-03-06; status 59/59 contracts; add NEXT_STEPS_LIST, CONTRACT_NEXT_STEPS_LIST
- docs/README, NEXT_STEPS_INDEX, 06-besu/MASTER_INDEX: Last Updated 2026-03-06
- Contract check script: 59 addresses (PMM, vault/reserve, CompliantFiatTokens); canonical CCIP/router
- New docs: EXECUTION_CHECKLIST, NEXT_STEPS_LIST, DOTENV_AUDIT, ADDITIONAL_PATHS, deployer gas runbook, WEMIX_ACQUISITION_TABLED, etc.
- Config: deployer-gas-routes, cro-wemix-swap-routes, routing-registry, token-mapping
- Scripts: check-contracts-on-chain-138, check-pmm-pool-balances-chain138, deployer-gas-auto-route, acquire-cro-and-wemix-gas
- Operator rule: operator-lan-access-check.mdc

Made-with: Cursor

											
										
										
											2026-03-06 19:11:25 -08:00
+								| **run-completable-tasks-from-anywhere.sh** | Passed — config OK, 59/59 on-chain (Chain 138), validation OK, reconcile-env printed |
-												chore: sync all changes to Gitea

- Config, docs, scripts, and backup manifests
- Submodule refs unchanged (m = modified content in submodules)

Made-with: Cursor

											
										
										
											2026-03-02 11:37:34 -08:00
+								| **preflight-chain138-deploy.sh** | Passed — dotenv exists, RPC Core (chainId 138), nonce consistent, no stuck txs |
 								---
 								## Per-task status (after check)
 								### 1. Full deployment order (Phase 0–6)
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| Phase 0 (prereqs) | Satisfied | Preflight passed; .env and RPC OK |
-												docs: update master documentation and push to Gitea (2026-03-06)

- MASTER_INDEX: Last Updated 2026-03-06; status 59/59 contracts; add NEXT_STEPS_LIST, CONTRACT_NEXT_STEPS_LIST
- docs/README, NEXT_STEPS_INDEX, 06-besu/MASTER_INDEX: Last Updated 2026-03-06
- Contract check script: 59 addresses (PMM, vault/reserve, CompliantFiatTokens); canonical CCIP/router
- New docs: EXECUTION_CHECKLIST, NEXT_STEPS_LIST, DOTENV_AUDIT, ADDITIONAL_PATHS, deployer gas runbook, WEMIX_ACQUISITION_TABLED, etc.
- Config: deployer-gas-routes, cro-wemix-swap-routes, routing-registry, token-mapping
- Scripts: check-contracts-on-chain-138, check-pmm-pool-balances-chain138, deployer-gas-auto-route, acquire-cro-and-wemix-gas
- Operator rule: operator-lan-access-check.mdc

Made-with: Cursor

											
										
										
											2026-03-06 19:11:25 -08:00
+								| Phase 1 (Chain 138 core) | Done | 59/59 contracts present |
-												chore: sync all changes to Gitea

- Config, docs, scripts, and backup manifests
- Submodule refs unchanged (m = modified content in submodules)

Made-with: Cursor

											
										
										
											2026-03-02 11:37:34 -08:00
+								| Phase 2 (TransactionMirror + PMM pools) | Done | Mirror deployed; all three pools created (cUSDT/cUSDC, cUSDT/USDT, cUSDC/USDC) |
 								| Phase 3 (Liquidity + DODOPMMProvider) | Partially done | DODOPMMProvider deployed at `0x8EF6657D2a86c569F6ffc337EE6b4260Bd2e59d0`; pools registered. **Remaining:** add liquidity (optional per doc) via `AddLiquidityPMMPoolsChain138.s.sol` or cast |
 								| Phase 4–6 | Not run | Optional / other chains; Operator |
 								**Conclusion:** Phases 0–3 (required) are done except adding liquidity. Full “completion” of Phase 0–6 requires Operator for Phase 4–6 and, if desired, adding liquidity in Phase 3.
 								---
 								### 2. Chain 138 PMM: add liquidity, DODOPMMProvider
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| DODOPMMProvider deployed | Done | `0x8EF6657D2a86c569F6ffc337EE6b4260Bd2e59d0`; pools registered (2026-02-28) |
 								| Pools created | Done | 0x9fcB… (cUSDT/cUSDC), 0xa3Ee… (cUSDT/USDT), 0x90bd… (cUSDC/USDC) |
 								| Add liquidity | Not run | Script: `smom-dbis-138/script/dex/AddLiquidityPMMPoolsChain138.s.sol`; runbook: [ADD_LIQUIDITY_PMM_CHAIN138_RUNBOOK.md](../03-deployment/ADD_LIQUIDITY_PMM_CHAIN138_RUNBOOK.md). Requires `ADD_LIQUIDITY_BASE_AMOUNT`, `ADD_LIQUIDITY_QUOTE_AMOUNT` in .env and deployer holding base/quote tokens |
 								**Conclusion:** Provider and pools are in place. Only “add liquidity” remains; Operator/LAN with token balance and .env amounts.
 								---
 								### 3. Operator tasks: Blockscout verify, 502 fix, NPMplus backup, deploy
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| Script exists | Yes | `./scripts/run-all-operator-tasks-from-lan.sh` |
 								| Dry-run | Run | Would run: run-wave0-from-lan.sh (NPMplus RPC fix + backup), then Blockscout verification |
 								| Requires | LAN, smom-dbis-138/.env (PRIVATE_KEY, NPM_PASSWORD for backup) | Cannot be run from this host without LAN |
 								**Conclusion:** Script is present and dry-run succeeds. Execution is Operator/LAN only.
 								---
 								### 4. Gnosis, Celo, Wemix CCIP bridges
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| Runbook | Exists | [CONFIG_READY_CHAINS_COMPLETION_RUNBOOK.md](../07-ccip/CONFIG_READY_CHAINS_COMPLETION_RUNBOOK.md) |
 								| Scripts | DeployWETHBridges.s.sol; complete-config-ready-chains.sh; fund-ccip-bridges-with-link.sh | Per runbook |
 								| Requires | Per-chain RPC, CCIP Router, LINK, WETH9/WETH10, deployer gas (xDAI, CELO, WEMIX) | Operator/LAN |
 								**Conclusion:** Documented and scripted; not run in this check. Operator/LAN.
 								---
 								### 5. LINK support on Mainnet relay
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| Runbook | Exists | [RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK.md](../07-ccip/RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK.md) |
 								| Requires | Implement option A or B, deploy, fund LINK, set relaySupported for LINK, restart relay | Operator/LAN |
 								**Conclusion:** Not run. Operator/LAN.
 								---
 								### 6. Repos & PRs: Ledger, Trust Wallet, Chainlist, on-ramps
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| Doc | [REPOSITORIES_AND_PRS_CHAIN138.md](REPOSITORIES_AND_PRS_CHAIN138.md) | External submissions; forms/PRs |
 								| Action | Submit PRs / forms per doc | External / manual |
 								**Conclusion:** No automated check; external.
 								---
 								### 7. PR-ready files: Chainlist, Trust Wallet
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| Chainlist | Present | `docs/04-configuration/pr-ready/eip155-138.json` |
 								| Trust Wallet | Present | `docs/04-configuration/pr-ready/trust-wallet-registry-chain138.json` |
 								| README | Present | [pr-ready/README.md](../04-configuration/pr-ready/README.md) with submission steps |
 								**Conclusion:** Files exist and are PR-ready; submission is external (fork, PR, forms).
 								---
 								### 8. E2E flow waves E1–E7
 								| Item | Status | Notes |
 								|------|--------|-------|
 								| Script | Exists | `./scripts/run-e2e-flow-tasks-full-parallel.sh` |
 								| Dry-run | Run | Lists waves E0–E7; E3 reports CHAIN_138_DODO_PMM_INTEGRATION set, suggests BRIDGE_REGISTRY_ADDRESS for Flow C |
 								| Execution | Operator/LAN for E0, E2, E4, E5, E6 | Waves include RPC, backup, Blockscout, routing, L2 PMM, bridge UI |
 								**Conclusion:** Script and dry-run OK; live execution is Operator/LAN for most waves.
 								---
 								## Summary
 								| Task | Checked | Can complete from here? | Action |
 								|------|--------|--------------------------|--------|
 								| 1. Full deployment order Phase 0–6 | Yes | No (Phase 4–6 + liquidity = Operator) | Document: Phases 0–3 done; add liquidity + Phase 4–6 = Operator |
 								| 2. Chain 138 PMM add liquidity | Yes | No (needs tokens + .env amounts) | Operator runs AddLiquidityPMMPoolsChain138 or cast |
 								| 3. Operator tasks | Yes | No (LAN required) | Operator runs run-all-operator-tasks-from-lan.sh |
 								| 4. Gnosis/Celo/Wemix CCIP | Yes | No | Operator per runbook |
 								| 5. LINK Mainnet relay | Yes | No | Operator per runbook |
 								| 6. Repos & PRs | Yes | No (external) | Submit per REPOSITORIES_AND_PRS_CHAIN138 |
 								| 7. PR-ready files | Yes | N/A (files exist) | Submit PRs using pr-ready/ files |
 								| 8. E2E waves E1–E7 | Yes | No (Operator for most) | Operator runs run-e2e-flow-tasks-full-parallel.sh |
 								**Completed in this environment:** Preflight and run-completable-tasks-from-anywhere passed; no remaining tasks can be fully “completed” from this host without LAN/Operator or external submission.
 								**Next step for operator:** Run `./scripts/run-all-operator-tasks-from-lan.sh` (and optionally `--deploy`) from a host on LAN; add liquidity when base/quote amounts and tokens are ready; run E2E waves as needed.