Files
proxmox/docs/03-deployment/FINAL_UNBLOCK_CHECKLIST_MAINNET_BSC.md
defiQUG 790e489538
Some checks failed
Deploy to Phoenix / deploy (push) Has been cancelled
docs: FQDN matrix, public-sector baseline, Chain138 runbooks, eIDAS repo reference
Made-with: Cursor
2026-03-27 18:46:56 -07:00

4.4 KiB

Final Unblock Checklist: Mainnet and BSC

Date: 2026-03-26
Wallet: 0x4A666F96fC8764181194447A7dFdb7d471b301C8

This checklist captures the exact remaining top-up targets after the live funding pass already completed on Ethereum Mainnet.

Current post-funding state

Mainnet

  • Deployer ETH: 0.003345428710812742
  • Deployer LINK: 0
  • Deployer WETH9: 0
  • MAINNET_CCIP_WETH9_BRIDGE LINK: 0.215485646892774955
  • MAINNET_CCIP_WETH10_BRIDGE LINK: 0.215485646892774955
  • CCIP_RELAY_BRIDGE_MAINNET WETH: 0.002634280582011289
  • LiquidityPoolETH available ETH: 0.015
  • LiquidityPoolETH available WETH: 0.001

BSC

  • Deployer BNB: 0.0091250643
  • Deployer LINK: 0
  • Deployer WETH: 0
  • CCIPWETH9_BRIDGE_BSC LINK: 0
  • CCIPWETH10_BRIDGE_BSC LINK: 0

Exact top-up targets

1. Mainnet deployer gas reserve

Repo recommendation: keep 0.05 ETH on the deployer for safe operator headroom.

  • Current: 0.003345428710812742 ETH
  • Target: 0.05 ETH
  • Top up: 0.046654571289187258 ETH

Repo recommendation: 10 LINK per bridge.

  • MAINNET_CCIP_WETH9_BRIDGE
    • Current: 0.215485646892774955 LINK
    • Target: 10 LINK
    • Top up: 9.784514353107225045 LINK
  • MAINNET_CCIP_WETH10_BRIDGE
    • Current: 0.215485646892774955 LINK
    • Target: 10 LINK
    • Top up: 9.784514353107225045 LINK
  • Mainnet CCIP LINK total top-up: 19.56902870621445009 LINK

3. Mainnet trustless LP target

Operator runbook example target:

  • LP ETH target: 1 ETH
  • LP WETH target: 0.5 WETH

Current:

  • LP ETH available: 0.015 ETH
  • LP WETH available: 0.001 WETH

Top-ups:

  • ETH top-up: 0.985 ETH
  • WETH top-up: 0.499 WETH

4. Mainnet relay bridge WETH target

There is no hardcoded repo target for relay inventory, so use a small bootstrap target unless you have a higher payout requirement.

  • Suggested bootstrap target: 0.01 WETH
  • Current: 0.002634280582011289 WETH
  • Top up: 0.007365719417988711 WETH

5. BSC deployer gas reserve

Repo recommendation: keep 0.06 BNB on the deployer.

  • Current: 0.0091250643 BNB
  • Target: 0.06 BNB
  • Top up: 0.0508749357 BNB

Repo recommendation: 10 LINK per bridge.

  • CCIPWETH9_BRIDGE_BSC
    • Current: 0 LINK
    • Target: 10 LINK
    • Top up: 10 LINK
  • CCIPWETH10_BRIDGE_BSC
    • Current: 0 LINK
    • Target: 10 LINK
    • Top up: 10 LINK
  • BSC CCIP LINK total top-up: 20 LINK

7. BSC relay bridge WETH (optional, only if relay mode is used)

If you are operating the BSC relay flow from services/relay/.env.bsc, top up the destination relay bridge too.

  • Suggested bootstrap target: 0.01 WETH
  • Current deployer WETH on BSC: 0
  • Acquire and transfer: 0.01 WETH to DEST_RELAY_BRIDGE

One-pass operator sequence after top-up

  1. Fund Mainnet deployer ETH reserve to 0.05 ETH.
  2. Fund Mainnet CCIP bridges to 10 LINK each:
    • MAINNET_CCIP_WETH9_BRIDGE
    • MAINNET_CCIP_WETH10_BRIDGE
  3. Fund Mainnet LP to 1 ETH and 0.5 WETH.
  4. Fund Mainnet relay bridge to 0.01 WETH minimum.
  5. Fund BSC deployer to 0.06 BNB.
  6. Fund BSC CCIP bridges to 10 LINK each.
  7. If relay mode is used on BSC, fund the BSC relay bridge with at least 0.01 WETH.
  8. Set BOND_MANAGER_MAINNET and CHALLENGE_MANAGER_MAINNET in .env.
  9. Run the full live bridge test from live-test-trustless-bridge.sh.

Scripted paths