d-bis/proxmox
4
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
031aaf9e7be725aa8a4ac60f61e1f978d9dacc91
proxmox/docs/07-ccip/OPTIONAL_DEPLOYMENTS_START_HERE.md
defiQUG bea1903ac9
Some checks failed
Deploy to Phoenix / deploy (push) Has been cancelled
Details
Sync all local changes: docs, config, scripts, submodule refs, verification evidence 
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-21 15:46:06 -08:00

14 KiB
Raw Blame History

Deployments — Start Here

Note: Nothing here is optional nor future — these are planned deployments (Chain 138 and multichain).

Last Updated: 2026-02-16
Purpose: Single entry point to run all deployments: AddressMapper (other chains), DODO PMM 138, Mainnet trustless, Paymaster. Run from repo root or smom-dbis-138/ with .env and PRIVATE_KEY.

Completion status (automated run)

Step Status Notes
§1 Dry-run ✅ Done ./scripts/run-optional-deployments.sh --dry-run — all phases listed; phases 4, 6, 7, 8, 9 would run (1–3, 5 skipped when env set).
§2A AddressMapper (Cronos) ✅ Deployed Deployed at 0x6F521cd9FCF7884cD4E9486c7790e818638e09Dd on Cronos (chain 25). config/smart-contracts-master.json → chains["25"].mapper updated.
§2B DODO PMM 138 ✅ Code Phase 7 skips unless DODO_VENDING_MACHINE_ADDRESS is set; DeployDODOPMMIntegration.s.sol no-ops when required env unset. Set DODO_VENDING_MACHINE_ADDRESS + COMPLIANT_* to run.
§2C Trustless (Lockbox138) ✅ Deployed 0x9E51fAAE511024161b99838Af0dbA38Ff354F72c. Stuck tx cleared; deploy succeeded.
§2C Trustless (Mainnet) ✅ Unblocked ETHEREUM_MAINNET_RPC set to https://ethereum.publicnode.com; DeployTrustlessBridge run (BondManager, InboxETH, LiquidityPoolETH, etc.). Addresses in smom-dbis-138/.env (*_MAINNET). Re-run deploy if broadcast was interrupted.
Phase 4 Reserve Keeper ✅ Code Script skips Phase 4 unless ORACLE_PRICE_FEED or RESERVE_KEEPER is set; DeployKeeper.s.sol no-ops with message when ORACLE_PRICE_FEED unset. Set env to run or skip.
Phase 8 eMoney 138 ✅ Deployed ComplianceRegistry, DebtRegistry, PolicyManager, eMoney impl, TokenFactory138, BridgeVault138 deployed.
§2D Paymaster ✅ Script run Informational script ran; next steps: deploy EntryPoint/AccountFactory/Paymaster from ERC-4337 kit, set env.
§4 Post-deployment check ✅ Done check-contracts-on-chain-138.sh: 46 present, 0 missing (EOA and Mainnet-only excluded).

To finish deployments: If Phase 6/8 failed with "Replacement transaction underpriced", run Fix stuck transaction (cancel-pending or flush-stuck-tx) first, then ./scripts/run-optional-deployments.sh --execute --phases 6,8. Set DODO env vars for §2B to run Phase 7. Use a Mainnet RPC that accepts your key for §2C Mainnet.

What else is needed (beyond PRIVATE_KEY in .env)

All steps read PRIVATE_KEY from smom-dbis-138/.env. In addition:

Item Required in .env Notes
§2A AddressMapper (other chain) None Set RPC_URL or CRONOS_RPC for target chain (e.g. CRONOS_RPC=https://evm.cronos.org). Deployer needs native gas on that chain (e.g. CRO on Cronos).
§2B DODO PMM 138 DODO_VENDING_MACHINE_ADDRESS, COMPLIANT_USDT_ADDRESS, COMPLIANT_USDC_ADDRESS OFFICIAL_USDT_ADDRESS, OFFICIAL_USDC_ADDRESS, DODO_APPROVE_ADDRESS. Get DODO Vending Machine from DODO docs or Chain 138 DODO deployment. .env.example has COMPLIANT_*; add DODO_VENDING_MACHINE_ADDRESS=0x....
§2C Trustless (138) RPC_URL_138 Defaults to http://192.168.11.211:8545 if unset. Deployer needs ETH on 138.
§2C Trustless (Mainnet) ETHEREUM_MAINNET_RPC Deployer needs ETH on Mainnet. Add --broadcast --via-ir --verify when running.
§2D Paymaster RPC_URL_138 Script is informational. To deploy: use ERC-4337 / Smart Accounts kit, then set ENTRY_POINT, SMART_ACCOUNT_FACTORY, PAYMASTER in .env.
§3 Run all RPC_URL_138 Same as above; Phase 7 (DODO) only runs if DODO_VENDING_MACHINE_ADDRESS (and compliant USDT/USDC) are set.
Phase 4 (Reserve Keeper) ORACLE_PRICE_FEED or RESERVE_KEEPER Set ORACLE_PRICE_FEED to deploy a new keeper; or set RESERVE_KEEPER to an existing PriceFeedKeeper address to skip (e.g. from config/smart-contracts-master.json chain 138 Price_Feed_Keeper).

Summary: For §2A, §2C (138), §3 you only need PRIVATE_KEY and RPC_URL_138 (and gas on the chain). For §2B add the three DODO/compliant vars. For §2C Mainnet add ETHEREUM_MAINNET_RPC and Mainnet ETH.

If you see "Replacement transaction underpriced": A stuck transaction (same nonce as the next deploy) is in the node’s mempool. Raising gas on the deploy does not fix it. Do one of the following, then re-run the deploy:

  1. Replace the stuck tx (recommended): From repo root, run
    ./scripts/cancel-pending-transactions.sh
    (sources smom-dbis-138/.env, sends 0-value self-transfers at the stuck nonce(s) with high gas so they replace and clear). If the script reports "No pending" but deploy still fails, try
    ./scripts/cancel-pending-transactions.sh --force
    to send one replacement at the current nonce (uses 500 gwei; set GAS_PRICE_138 for higher). Then run ./scripts/run-optional-deployments.sh --execute --phases 6,8.
  2. Clear the node mempool (Chain 138 RPC/validators): From a host that can reach the RPC, run
    ./scripts/flush-stuck-tx-rpc-and-validators.sh
    (tries txpool_besuClear on RPC, or full pool clear on validators). Then run the deploy again.
  3. If replacement still fails (e.g. "underpriced" even at 500 gwei): The RPC node may have a stuck tx that Besu will not replace by gas price, or the pool clear did not affect that node. Option A: Run flush-stuck-tx-rpc-and-validators.sh from the same host that serves the RPC (e.g. the Chain 138 RPC VM), then run the deploy from a machine on the same LAN immediately after. Option B: Use a fresh deployer wallet so the next nonce is 0.
  4. After all else: verify RPC 2101 full approve and in sync with 5 validators. Run
    ./scripts/verify/verify-rpc-2101-approve-and-sync.sh
    to confirm the RPC on VMID 2101 has Chain 138, ADMIN API, ≥5 peers (including all 5 validator IPs 192.168.11.100–104), block production advancing, and optionally all 5 validators active (requires SSH from LAN). Ensures the RPC is permissioned and synced before or after deploy.

Where the stuck transaction comes from: The stuck tx is the Lockbox138 deploy (Phase 6) from a previous run. Forge sent it with nonce 13274 to the RPC at VMID 2101 (192.168.11.211). The RPC accepted it into its local transaction pool, but the tx was never included in a block (e.g. block production stalled, or the tx was never propagated to validators). So it sits in the RPC node’s mempool at nonce 13274. Every new tx you send at 13274 is treated as a replacement; Besu rejects it as “underpriced” unless the new tx has higher gas than the one already in the pool (or the pool is cleared). The full flush (clear-all-transaction-pools.sh) runs over SSH on the Proxmox host (r630-01); if you ran it from a machine without SSH to 192.168.11.11, the RPC pool may not have been cleared. After a restart, validators can also re-gossip the same tx back to the RPC. See STUCK_TX_ROOT_CAUSE_AND_GUARDRAILS.

Phase 4 and Phase 7 skip automatically when required env is missing: Phase 4 is skipped unless ORACLE_PRICE_FEED or RESERVE_KEEPER is set; Phase 7 is skipped unless DODO_VENDING_MACHINE_ADDRESS is set (and the Forge script also no-ops if compliant USDT/USDC are unset).

1. Dry-run first (no broadcast)

From proxmox repo root:

./scripts/run-optional-deployments.sh --dry-run

Or from smom-dbis-138/:

cd smom-dbis-138
source .env
./scripts/deployment/deploy-optional-future-all.sh --dry-run

This prints every command that would run. Then run without --dry-run to execute.

2. Deployments (in order)

A. AddressMapper on other chains (e.g. Cronos)

Deploys an empty AddressMapper (no Chain-138-specific mappings) so you can set mapper in config for that chain.

cd smom-dbis-138
source .env

# Cronos example
export RPC_URL="$CRONOS_RPC"   # or https://evm.cronos.org
forge script script/DeployAddressMapperOtherChain.s.sol:DeployAddressMapperOtherChain \
  --rpc-url "$RPC_URL" --broadcast --private-key "$PRIVATE_KEY" --legacy

After deploy: Set config/smart-contracts-master.json → chains["25"].mapper (Cronos) to the printed address (replace "canonical").

Ref: RECOMMENDED_COMPLETION_CHECKLIST §5.

B. DODO PMM on Chain 138

Required env: DODO_VENDING_MACHINE_ADDRESS, COMPLIANT_USDT_ADDRESS, COMPLIANT_USDC_ADDRESS. Additional: OFFICIAL_USDT_ADDRESS, OFFICIAL_USDC_ADDRESS, DODO_APPROVE_ADDRESS.

cd smom-dbis-138
source .env
forge script script/dex/DeployDODOPMMIntegration.s.sol \
  --rpc-url "$RPC_URL_138" --broadcast --private-key "$PRIVATE_KEY" --with-gas-price "${GAS_PRICE_138:-2000000000}"

Then create pools (e.g. createCUSDTUSDTPool, createCUSDCUSDCPool) and set CHAIN_138_DODO_POOL_MANAGER / CHAIN_138_DODO_VENDING_MACHINE in env.
Ref: DODO_PMM_INTEGRATION, LIQUIDITY_POOL_CONTROLS_RUNBOOK.

C. Mainnet trustless stack (Lockbox138 + Mainnet)

Chain 138 (Lockbox138):

cd smom-dbis-138
source .env
forge script script/bridge/trustless/DeployTrustlessBridge.s.sol:DeployTrustlessBridge \
  --rpc-url "$RPC_URL_138" --broadcast --private-key "$PRIVATE_KEY" --with-gas-price "${GAS_PRICE_138:-2000000000}"

Mainnet (BondManager, ChallengeManager, LiquidityPoolETH, InboxETH):

forge script script/bridge/trustless/DeployTrustlessBridge.s.sol:DeployTrustlessBridge \
  --rpc-url "$ETHEREUM_MAINNET_RPC" --broadcast --via-ir --verify

Ref: OPTIONAL_FUTURE_DEPLOYMENTS_RUNBOOK §1, bridge/trustless/DEPLOYMENT_INSTRUCTIONS.

D. Paymaster / Smart accounts (Chain 138)

Deploy from ERC-4337 / MetaMask Smart Accounts Kit, then set ENTRY_POINT, SMART_ACCOUNT_FACTORY, PAYMASTER in .env.

cd smom-dbis-138
forge script script/smart-accounts/DeploySmartAccountsKit.s.sol \
  --rpc-url "$RPC_URL_138" --broadcast --private-key "$PRIVATE_KEY" --with-gas-price "${GAS_PRICE_138:-2000000000}"

(Script may be informational only; deploy actual contracts from the kit.)
Ref: SMART_ACCOUNTS_DEPLOYMENT_NOTE.

3. Run all (Chain 138) in one go

From proxmox repo root:

./scripts/run-optional-deployments.sh --execute

Or with specific phases (e.g. DODO + Trustless Lockbox only):

./scripts/run-optional-deployments.sh --execute --phases 6,7

Phases: 1=Deterministic core, 2=Vault, 3=Reserve, 4=Keeper, 5a/5b=Channels, 6=Trustless Lockbox138, 7=DODO PMM, 8=eMoney, 9=Smart accounts (informational).

Ref: deploy-optional-future-all.sh, OPTIONAL_FUTURE_DEPLOYMENTS_RUNBOOK.

4. After deployment

  1. Update env: Add new addresses to smom-dbis-138/.env (and root .env if used). See script output for export ... lines.
  2. Update config: In config/smart-contracts-master.json set chains["<chainId>"].mapper and contracts.Address_Mapper for other-chain mappers; add DODO/Trustless addresses when deployed.
  3. Verify: Run ./scripts/verify/check-contracts-on-chain-138.sh. From LAN with secrets: ./scripts/verify/run-contract-verification-with-proxy.sh for Blockscout.
  4. Periodic checks: Run ./scripts/run-completable-tasks-from-anywhere.sh (config + on-chain + validation).

5. Next steps — complete in order

From anywhere (no LAN):

# Action Command
1 Config + on-chain + validation ./scripts/run-completable-tasks-from-anywhere.sh
1b Mapper: validation + operator checklist ./scripts/run-remaining-mapper-tasks.sh (validates config, on-chain 138, prints Wemix/CCIP/LINK/DODO/Trustless steps)
2 Dry-run deployments ./scripts/run-optional-deployments.sh --dry-run
3 Deploy (Chain 138 phases 6, 8 when ready) ./scripts/run-optional-deployments.sh --execute --phases 6,8 (set GAS_PRICE_138 if needed)
4 Check contracts on 138 ./scripts/verify/check-contracts-on-chain-138.sh
4b After all else: RPC 2101 full approve and in sync ./scripts/verify/verify-rpc-2101-approve-and-sync.sh — full fix flow: RPC_AND_VALIDATOR_TESTING_RUNBOOK.

From LAN with secrets (operator):

# Action Command / doc
5 Wemix token verify scan.wemix.com/tokens → update JSON if needed → bash scripts/validation/validate-config-files.sh
6 Gnosis, Celo, Wemix CCIP bridges CONFIG_READY_CHAINS_COMPLETION_RUNBOOK
7 LINK on Mainnet relay RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK
8 Blockscout verification source smom-dbis-138/.env 2>/dev/null; ./scripts/verify/run-contract-verification-with-proxy.sh
9 E2E 502 fix ./scripts/maintenance/run-all-maintenance-via-proxmox-ssh.sh --e2e or address-all-remaining-502s.sh
10 All operator tasks ./scripts/run-all-operator-tasks-from-lan.sh [--deploy] [--create-vms] — STEPS_FROM_PROXMOX_OR_LAN_WITH_SECRETS

Full list: NEXT_STEPS_AND_REMAINING_TODOS.

Master completion plan (all incomplete + missing items): COMPLETION_MASTER_PLAN.

Completion status (2026-02-15): COMPLETION_STATUS_20260215 — what was done, actionable one-step fixes, operator commands.

Reference in New Issue View Git Blame Copy Permalink