All Tasks to Complete (Including Optional)
Last Updated: 2026-04-07
Purpose: Single list of every task (required and optional) from TODOS_CONSOLIDATED, REQUIRED_FIXES_GAPS_AND_DEPLOYMENTS_LIST, ADDITIONAL_RECOMMENDATIONS_TABLE, REMAINING_DEPLOYMENTS, and E2E flow docs.
Quick run (from anywhere): ./scripts/run-completable-tasks-from-anywhere.sh
Operator (LAN): ./scripts/run-all-operator-tasks-from-lan.sh [--deploy]
Focused sub-checklist: GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS.md
1. Verified remaining (blocking / high impact)
| # |
Task |
Status |
Notes |
| V1 |
Token-aggregation build |
✅ Done |
Re-verified 2026-03-06. |
| V2 |
Add liquidity (Chain 138 PMM) |
⏳ Blocked |
Deployer WETH/cUSDT/cUSDC = 0. Mint/fund per TOKENS_AND_NETWORKS_MINTABLE_TO_DEPLOYER, then AddLiquidityPMMPoolsChain138. |
| V3 |
RPC 2101 read-only |
⚠️ If needed |
Run make-rpc-vmids-writable + health-check only when host I/O errors occur. |
| V4 |
Wemix / Gnosis / Celo / Cronos CCIP |
🔄 Partial |
Celo + Gnosis done. Wemix tabled (need 0.4 WEMIX). Cronos: set CRONOS_RPC, run deploy-bridges cronos. |
| V5 |
LINK relay, E2E 502s, operator run |
🔄 Partial |
E2E 502s ✅; Operator run ✅. LINK support runbook ⏳ Pending. |
| V6 |
External (Ledger, Trust, CoinGecko/CMC, on-ramps) |
⏳ Pending |
Third-party submissions. |
2. Pre-deploy (before any Chain 138 deploy)
| # |
Task |
Command / doc |
| 0a |
Check deployer gas (Chain 138) |
RPC_URL_138=http://192.168.11.211:8545 ./scripts/deployment/check-deployer-balance-chain138-and-funding-plan.sh |
| 0a2 |
Deployer gas auto-route (optional) |
./scripts/deployment/deployer-gas-auto-route.sh; acquire CRO/WEMIX: ./scripts/deployment/acquire-cro-and-wemix-gas.sh |
| 0b |
Core RPC = IP:port in smom-dbis-138/.env |
RPC_URL_138=http://192.168.11.211:8545 (not FQDN). |
| 0c |
Test all contracts before deploy |
./scripts/deployment/test-all-contracts-before-deploy.sh (or `--no-match "Fork |
| 0 |
Preflight (RPC, dotenv, nonce) |
./scripts/deployment/preflight-chain138-deploy.sh [--cost] |
3. High priority
| # |
Task |
Ref |
| 1 |
Wemix (1111) token addresses: confirm WETH, USDT, USDC on scan.wemix.com; update token-mapping and WEMIX_TOKEN_VERIFICATION.md |
validate-config-files.sh |
| 2 |
Gnosis, Cronos, Celo, Wemix CCIP bridges: per chain set RPC, CCIP Router, LINK, WETH9/WETH10; DeployWETHBridges; add 138↔chain; fund LINK |
CONFIG_READY_CHAINS_COMPLETION_RUNBOOK |
4. Medium priority
| # |
Task |
Ref |
| 3 |
LINK support on Mainnet relay (Option A or B); implement, deploy, fund LINK; set relaySupported for LINK |
RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK |
| 4 |
Run "from anywhere" checks periodically |
./scripts/run-completable-tasks-from-anywhere.sh |
| 5 |
Placeholders (code): canonical addresses, AlltraAdapter setBridgeFee, smart accounts kit, quote FABRIC_CHAIN_ID, .bak |
REQUIRED_FIXES_UPDATES_GAPS |
| 6 |
API keys: sign up per reports/API_KEYS_REQUIRED.md; add to .env |
reports/API_KEYS_REQUIRED.md |
5. When you have LAN / Proxmox + secrets
| # |
Task |
Command / doc |
| 7 |
Blockscout verification |
./scripts/run-all-operator-tasks-from-lan.sh or ./scripts/verify/run-contract-verification-with-proxy.sh |
| 8 |
Fix E2E 502s (if recur) |
./scripts/maintenance/address-all-remaining-502s.sh [--e2e] |
| 9 |
Operator tasks script (backup, verify, deploy) |
./scripts/run-all-operator-tasks-from-lan.sh [--deploy] [--create-vms] |
| 10 |
sendCrossChain (real) |
bash scripts/bridge/run-send-cross-chain.sh 0.01 (PRIVATE_KEY + LINK ready) |
| 11 |
NPMplus backup |
bash scripts/verify/backup-npmplus.sh (NPM_PASSWORD in .env) |
| 12 |
Mint tokens to deployer for liquidity/bridges |
TOKENS_AND_NETWORKS_MINTABLE_TO_DEPLOYER |
| — |
NPMplus API unreachable |
./scripts/maintenance/fix-npmplus-services-via-proxmox-ssh.sh |
| — |
E2E from LAN (no DNS) |
E2E_DNS_FROM_LAN_RUNBOOK; E2E_USE_SYSTEM_RESOLVER=1 ./scripts/verify/verify-end-to-end-routing.sh |
6. Phase A — Hub liquidity (Chain 138)
| Step |
Task |
Ref |
| A.1 |
Mint cUSDT and cUSDC to deployer |
cd smom-dbis-138 && ./scripts/mint-for-liquidity.sh |
| A.2 |
Add liquidity to PMM pools (cUSDT/cUSDC first) |
ADD_LIQUIDITY_PMM_CHAIN138_RUNBOOK; mint-for-liquidity.sh --add-liquidity |
| A.3 |
(Optional) Mint other c* (cEURC, cEURT, cGBP*, etc.) for future pools |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §1 |
7. Phase B — Bridge coverage (all 13 chains)
| Step |
Task |
Ref |
| B.1 |
Celo (42220): CCIP bridges deployed ✅; ensure destinations + LINK funded |
complete-config-ready-chains.sh |
| B.2a |
Cronos (25): Fund deployer ~15 CRO; set CRONOS_RPC, CCIP_ROUTER_CRONOS; deploy bridges; complete-config |
acquire-cro-and-wemix-gas.sh; deploy-bridges-config-ready-chains.sh cronos |
| B.2b |
Wemix (1111): Fund deployer ~0.4 WEMIX (manual/aggregator); deploy bridges; complete-config |
WEMIX_ACQUISITION_TABLED; deploy-bridges-config-ready-chains.sh wemix |
| B.3 |
Fund all CCIP bridges with LINK |
./scripts/deployment/fund-ccip-bridges-with-link.sh |
| B.4 |
(Optional) LINK support on Mainnet relay |
RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK |
8. Phase C — Public-chain cW* and edge pools
| Step |
Task |
Ref |
| C.1 |
Deploy or bridge cW* tokens per chain (1, 56, 137, 10, 42161, 8453, 43114, 100, 25, 42220, 1111) |
PHASE_C_CW_AND_EDGE_POOLS_RUNBOOK |
| C.2 |
Create and fund PMM edge pools (cW*/USDC, cW*/USDT) per pool-matrix |
PHASE_C_CW_AND_EDGE_POOLS_RUNBOOK |
| C.3 |
(Optional) Stabilization bot / peg bands for cW* |
cross-chain-pmm-lps |
9. Phase D — Optional (extended coverage)
| Step |
Task |
Ref |
| D.1 |
XAU token + XAU-anchored pools (138) |
PHASE_D_OPTIONAL_CHECKLIST |
| D.2 |
Vault ac* / vdc* / sdc* for new base tokens |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §5 |
| D.3 |
ALL Mainnet: ACADT/ACADC when Alltra adds CAD; D-WIN W on 138/651940 |
PHASE_D_OPTIONAL_CHECKLIST |
| D.4 |
Mainnet trustless stack: LiquidityPoolETH, InboxETH, BondManager |
OPTIONAL_DEPLOYMENTS_START_HERE §C |
10. Token deployments (remaining)
| # |
Task |
Ref |
| T1 |
DeployCompliantFiatTokens (cEURC, cEURT, cGBP*, etc.) |
✅ Done 2026-02-27 |
| T2 |
(Optional) cCADT: uncomment in DeployCompliantFiatTokens.s.sol |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §1.2 |
| T3 |
cAUSDT / cWAUSDT corridor: live; remaining work is PMM edge pools and any further destination-chain rollout |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §1.3 |
| T4 |
ACADT (651940) when Alltra adds CAD token |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §2 |
| T5 |
cW* on public chains + PMM edge pools per pool-matrix |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §3 |
| T6 |
(Optional) D-WIN W on 138/651940 |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §4 |
| T7 |
Vault ac*/vdc*/sdc* for new base tokens (after DeployCompliantFiatTokens) |
TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §5 |
11. Low priority / planned
| # |
Task |
Ref |
| 12 |
AddressMapper on other chains (DeployAddressMapperOtherChain; set mapper in smart-contracts-master) |
OPTIONAL_DEPLOYMENTS_START_HERE §A |
| 13 |
DODO PMM liquidity on 138: add liquidity and document (pools already deployed) |
ADD_LIQUIDITY_PMM_CHAIN138_RUNBOOK |
| 14 |
Mainnet trustless stack: Lockbox138 + InboxETH, BondManager, LiquidityPoolETH; fund liquidity |
OPTIONAL_DEPLOYMENTS_START_HERE §C |
11b. GRU v2 / D3MM / Edge rollout
| # |
Task |
Ref |
| G1 |
Promote D3MM from private pilot to canonical Chain 138 GRU v2 venue set |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §2.1 |
| G2 |
Expand D3MM beyond WETH10 <-> USDT and publish canonical pool inventory |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §2.1 |
| G3 |
Roll out D3MM across in-scope public EVM networks and update deployment graph / route matrices |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §2.2 |
| G4 |
Freeze GRU v2 edge-venue policy for Uniswap, Balancer, Curve, and 1inch |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §2.3 |
| G5 |
Build native-token completeness matrix (mapped / deployed / bridge-live / liquidity-live / routing-visible) |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §2.4 |
| G6 |
Build protocol-source assurance matrix for DODO, Uniswap, Balancer, Curve, and 1inch |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §2.5 |
| G7 |
(Optional) Define non-EVM adapter-based GRU v2 edge architecture |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §3.1 |
| G8 |
(Optional) Extend D3MM to non-USD Wave 1 assets after the core USD path is canonical |
GRU_V2_D3MM_EDGE_AND_PROTOCOL_ASSURANCE_TASKS §3.2 |
12. External / third-party
| # |
Task |
Doc |
| 15 |
Ledger: await Tally response; sign agreement and integrate |
ADD_CHAIN138_TO_LEDGER_LIVE |
| 16 |
Trust Wallet: open PR to trustwallet/wallet-core with Chain 138 |
ADD_CHAIN138_TO_TRUST_WALLET |
| 17 |
Consensys: outreach for Swaps/Bridge |
CONSENSYS_OUTREACH_PACKAGE |
| 18 |
CoinGecko/CMC: submit Chain 138 and tokens |
CMC_COINGECKO_SUBMISSION_RUNBOOK |
| — |
Chainlist / on-ramps |
pr-ready/README; REPOSITORIES_AND_PRS_CHAIN138 |
13. Tezos / Etherlink (when scoped)
| # |
Task |
Ref |
| 19 |
Verify Etherlink (42793) on CCIP; record selector/Router/fee or "custom relay only" |
TEZOS_CCIP_REMAINING_ITEMS |
| 20 |
Verify Jumper and LiFi for 138, 651940, 42793, Tezos; update support matrix |
TEZOS_CCIP_REMAINING_ITEMS |
| 21 |
InitializeRegistry, DeployAllAdapters; Etherlink receiver; Tezos L1 and Etherlink relay services |
TEZOS_CCIP_REMAINING_ITEMS |
14. Deployment / infrastructure phases (optional)
| Phase |
Tasks |
Status |
| Phase 1 — VLAN |
UDM Pro VLAN; VLAN-aware bridge; migrate services to VLANs |
⏳ Pending |
| Phase 2 — Observability |
Monitoring stack; Grafana via Cloudflare Access; alerts |
⏳ Pending |
| Phase 3 — CCIP fleet |
CCIP Ops/Admin; commit/execute/RMN nodes; NAT pools |
⏳ Pending |
| Phase 4 — Sovereign tenants |
Sovereign VLANs; tenant isolation; access control |
⏳ Pending |
15. Security & codebase
| # |
Task |
Ref |
| 22 |
Security audits: smom VLT-024, ISO-024; bridge BRG-VLT, BRG-ISO |
TODO_TASK_LIST_MASTER §5 |
| 23 |
dbis_core: ~1186 TS errors (deferred) |
TODO_TASK_LIST_MASTER §8 |
| 24 |
(Optional) Paymaster when sources ready |
SMART_ACCOUNTS_DEPLOYMENT_NOTE |
16. E2E flow waves (TASKS_TO_INCREASE_ALL_E2E_FLOWS)
| Wave |
Tasks |
Run |
| E0 |
X1, X6, X7, A1 — RPC writable, TransactionMirror, deployer funded, Core RPC |
Op |
| E1 |
A2, A3, A4 — PMM pools create, register, add liquidity (138) |
run-pmm-full-parity Phase 1 |
| E2 |
B1, B2 — CCIP config and fund bridges |
complete-config-ready-chains.sh; fund-ccip-bridges-with-link.sh |
| E3 |
A5, B4, B5, C3, X8 — token-aggregation env, bridge routes, token mapping, quote API, token list |
Code/Op |
| E4 |
X2, X3, X4, X5 — Blockscout verify, E2E routing, explorer E2E, token-aggregation health |
Op/LAN |
| E5 |
X10, X11, X12 — cUSDT/cUSDC and PMM on L2s; token-aggregation new chains |
run-pmm-full-parity Phase 2 |
| E6 |
B6, B7, C5, C6, C7 — Bridge UI, test bridge, destination DEX, full path quote UI, E2E test |
Code/Op |
| E7 |
X13, X14 — Update PMM_DEX_ROUTING_STATUS; runbooks |
Doc |
Script: ./scripts/run-e2e-flow-tasks-full-parallel.sh [--dry-run]
17. Flow A (swap on 138) — individual tasks
| # |
Task |
Type |
| A1 |
Core RPC writable and reachable |
Op |
| A2 |
Verify or create three PMM pools on 138 |
Op/Auto |
| A3 |
Register pools with DODOPMMProvider |
Op |
| A4 |
Add liquidity to all three PMM pools |
Op |
| A5 |
Token-aggregation indexes DODO on 138 |
Op/Code |
| A6 |
Expose token-aggregation API for dApps/Snap |
Op |
| A7 |
(Optional) Keep router-v2 + pilot venue layer verified on 138 |
Op |
| A8 |
(Optional) N-hop quote/pathfinding in token-aggregation |
Code |
18. Flow B (bridge) — individual tasks
| # |
Task |
Type |
| B1 |
CCIP bridges on 138 configured and funded |
Op |
| B2 |
Bridge destination config (138 ↔ Gnosis/Cronos/Celo/Wemix) |
Op |
| B3 |
Relay (138→Mainnet) operational if using relay path |
Op |
| B4 |
Token-aggregation GET /api/v1/bridge/routes returns Chain 138 bridges |
Code/Op |
| B5 |
Token mapping API for 138↔destination |
Code/Op |
| B6 |
Frontend: wire Bridge UI to routes + token mapping |
Code |
| B7 |
Test 138→dest and dest→138 with small amounts |
Op |
19. Flow C (swap–bridge–swap) — individual tasks
| # |
Task |
Type |
| C1 |
Complete Flow A (liquidity and quote on 138) |
— |
| C2 |
Complete Flow B (bridge configured and funded) |
— |
| C3 |
POST /api/bridge/quote returns sourceSwapQuote and destinationSwapQuote |
Code/Op |
| C4 |
(Optional) Deploy SwapBridgeSwapCoordinator on-chain |
Op |
| C5 |
Destination-chain DEX/aggregator for destinationSwapQuote |
Code/Op |
| C6 |
Frontend: "Get full path quote" and execute |
Code |
| C7 |
E2E test: swap 138 → bridge → swap destination |
Op/Auto |
20. Cross-cutting (X1–X14)
| # |
Task |
Type |
| X1 |
RPC 2101 writable and healthy |
Op |
| X2 |
On-chain contract verification (Blockscout) |
Op |
| X3 |
E2E routing (DNS + HTTPS + RPC) |
Auto |
| X4 |
Explorer E2E (homepage, API, SPA) |
Auto |
| X5 |
Token-aggregation health and DB |
Op |
| X6 |
TransactionMirror deployed and funded |
Op |
| X7 |
Deployer funded (138 and dest chains) |
Op |
| X8 |
Token list updated and validated |
Code/Op |
| X10–X14 |
L2 pools, bridge UI, runbooks |
Op/Code/Doc |
21. Operator checklist (R1–R24)
- R1: Verify every deployed contract on Blockscout after each deployment
- R2: Keep CONTRACT_ADDRESSES_REFERENCE and ADDRESS_MATRIX_AND_STATUS updated
- R3: Run check-contracts-on-chain-138.sh; fix MISSING/EMPTY
- R4: Use canonical CCIPWETH9Bridge; do not use deprecated
- R5: Never commit .env or private keys; rotate if exposed
- R6–R7: API keys in .env; restrict deployer and RPC admin
- R8–R9: Set RPC_URL_138; use GAS_PRICE on Chain 138
- R10–R11: Phased core deploy order; manage nonce if tx stuck
- R12–R15: Keep runbooks in sync; document addresses; single deploy→verify script
- R16–R19: Env per environment; monitor bridge/oracle; Blockscout up; run forge test before deploy
- R20–R24: NatSpec on public functions; NPMplus order; document blocks; progress/dry-run/validation; token-mapping single source
Full list: RECOMMENDATIONS_OPERATOR_CHECKLIST.md
22. Proxmox / code quality / doc (recommendations 1–91)
- Proxmox 1–35: .env permissions, validator keys, SSH key-only, firewall 8006, VLANs, metrics, backup, runbooks, retry/timeout, logging, CI/CD, progress indicators, config validation, etc.
- Code 36–43: Shebang, set -euo pipefail, script header, shellcheck, shfmt, shared lib.
- Doc 44–47, 68–74: Consolidation, accuracy, quick reference, decision trees, glossary.
- Security 48–52: Secret audit, input validation, RBAC.
- Config/testing 53–67: Config templates, env standardization, test coverage, CI tests, health.
- Infrastructure 75–81: VLAN, observability, CCIP fleet, sovereign tenants, Besu containers.
- Codebase 82–91: Security audits, dbis_core TS, canonical env, AlltraAdapter, smart accounts, .bak.
Ref: ADDITIONAL_RECOMMENDATIONS_TABLE §10–16; 10-best-practices/RECOMMENDATIONS_AND_SUGGESTIONS.
23. Maintenance (ongoing)
| Task |
Frequency |
| Monitor explorer sync / RPC health (e.g. VMID 2201) |
Daily |
| Check config API uptime |
Weekly |
| Review explorer logs |
Weekly |
| Update token list |
As needed |
| Fix E2E 502s when domains 502 |
As needed — address-all-remaining-502s.sh |
Cron: schedule-daily-weekly-cron.sh --install; NPMplus: schedule-npmplus-backup-cron.sh --install.
24. Required fixes (if blocking)
| Item |
Action |
| RPC 2101 read-only |
make-rpc-vmids-writable-via-ssh.sh then health-check-rpc-2101.sh |
| Stuck transactions / nonce |
clear-all-transaction-pools.sh; wait ~60s; use GAS_PRICE_138 if needed |
| Token-aggregation build |
✅ Fixed 2026-03-03 |
25. Gaps (config / env / ops)
- Core RPC = IP:port in smom-dbis-138/.env
- Deployer gas (138): ≥ ~0.006 ETH (recommended 1–2 ETH)
- Env: PRIVATE_KEY, RPC_URL_138; for PMM: DODO_PMM_INTEGRATION_ADDRESS, pool addresses
- POOL_MANAGER_ROLE on DODOPMMIntegration
- TRANSACTION_MIRROR_ADDRESS after deploy
- Wemix token addresses; canonical CUSDC/CUSDT in env; CCIPWETH9Bridge canonical only
- Token-aggregation DB: create DB, migrations, DATABASE_URL, restart
- Nginx proxy order (VMID 5000): location /api/v1/ before /api/
Ref: REQUIRED_FIXES_GAPS_AND_DEPLOYMENTS_LIST §2.
References
dbd517b279