Files

defiQUG cb47cce074 Complete markdown files cleanup and organization

- Organized 252 files across project
- Root directory: 187 → 2 files (98.9% reduction)
- Moved configuration guides to docs/04-configuration/
- Moved troubleshooting guides to docs/09-troubleshooting/
- Moved quick start guides to docs/01-getting-started/
- Moved reports to reports/ directory
- Archived temporary files
- Generated comprehensive reports and documentation
- Created maintenance scripts and guides

All files organized according to established standards.

2026-01-06 01:46:25 -08:00

2.5 KiB

Raw Blame History

Blockscout Static IP Configuration - Complete

Date: $(date)
Status: ✅ COMPLETED

✅ Completed Actions

1. Static IP Configuration

✅ Container VMID 5000 configured with static IP: 192.168.11.140/24
✅ Gateway: 192.168.11.1
✅ MAC Address: BC:24:11:3C:58:2B (preserved)
✅ Network configuration verified

2. IP Address Verification

✅ Container now uses static IP matching all scripts and configurations
✅ All scripts reference 192.168.11.140 which now matches actual container IP

3. Scripts Created

✅ scripts/set-blockscout-static-ip.sh - Configure static IP
✅ scripts/check-blockscout-actual-ip.sh - Verify IP address
✅ scripts/complete-blockscout-firewall-fix.sh - Comprehensive connectivity check

📊 Configuration Details

Container Network Configuration

Interface: eth0
IP Address: 192.168.11.140/24
Gateway: 192.168.11.1
Bridge: vmbr0
MAC Address: BC:24:11:3C:58:2B
Type: veth

Before Configuration

Container used DHCP (ip=dhcp)
Actual IP may have differed from expected 192.168.11.140
Scripts referenced 192.168.11.140 but container may have had different IP

After Configuration

Container uses static IP 192.168.11.140/24
All scripts now reference the correct IP
Configuration matches deployment scripts and network.conf

🔧 Scripts Updated

All scripts correctly reference 192.168.11.140:

✅ scripts/complete-blockscout-firewall-fix.sh
✅ scripts/configure-cloudflare-tunnel-route.sh
✅ scripts/access-omada-cloud-controller.sh
✅ scripts/fix-blockscout-explorer.sh
✅ scripts/install-nginx-blockscout.sh

📝 Next Steps

Remaining Manual Action

Configure Omada firewall rule:

Access Omada Controller: bash scripts/access-omada-cloud-controller.sh
Navigate to: Settings → Firewall → Firewall Rules
Create allow rule:
- Source: 192.168.11.0/24
- Destination: 192.168.11.140:80
- Protocol: TCP
- Action: Allow
- Priority: High (above deny rules)

Verification

After firewall rule is configured:

# Run comprehensive check
bash scripts/complete-blockscout-firewall-fix.sh

# Test connectivity
curl https://explorer.d-bis.org/health

🎯 Summary

Issue: Container used DHCP, IP may not have matched scripts
Solution: Configured static IP 192.168.11.140/24
Status: ✅ Configuration complete
Remaining: Manual firewall rule configuration

Last Updated: $(date)

2.5 KiB Raw Blame History