explorer-monorepo/UDM_PRO_COMPLETE_DIAGNOSIS.sh

#!/bin/bash

# Complete UDM Pro Diagnosis Script
# Runs all diagnosis commands and generates report

set -uo pipefail

UDM_USER="OQmQuS"
UDM_PASS="m0MFXHdgMFKGB2l3bO4"
UDM_IP="192.168.11.1"

REPORT_FILE="/home/intlc/projects/proxmox/explorer-monorepo/UDM_PRO_DIAGNOSIS_REPORT.md"

# Colors
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
BLUE='\033[0;34m'
NC='\033[0m'

echo "=========================================="
echo "UDM Pro Complete Diagnosis"
echo "=========================================="
echo ""

# Function to run command on UDM Pro
udm_cmd() {
    sshpass -p "$UDM_PASS" ssh -o ConnectTimeout=10 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR "$UDM_USER@$UDM_IP" "$@" 2>&1
}

# Start report
cat > "$REPORT_FILE" << EOF
# UDM Pro Complete Diagnosis Report

**Date**: $(date)
**UDM Pro IP**: $UDM_IP
**SSH User**: $UDM_USER

---

## 1. System Information

EOF

echo -e "${BLUE}=== System Information ===${NC}"
SYSTEM_INFO=$(udm_cmd "uname -a")
echo "$SYSTEM_INFO"
echo "$SYSTEM_INFO" >> "$REPORT_FILE"
echo "" >> "$REPORT_FILE"

# Port Forwarding Check
echo ""
echo -e "${BLUE}=== Port Forwarding (NAT Rules) ===${NC}"
cat >> "$REPORT_FILE" << EOF
## 2. Port Forwarding Rules (NAT Table)

Checking for DNAT rules for 76.53.10.36:80/443 → 192.168.11.166:80/443

EOF

NAT_RULES=$(udm_cmd "sudo iptables -t nat -L PREROUTING -n -v 2>&1 | grep -A 3 '76.53.10.36'")
if [ -n "$NAT_RULES" ]; then
    echo -e "${GREEN}✅ Port forwarding rules found:${NC}"
    echo "$NAT_RULES"
    echo "**Status**: ✅ **Port forwarding rules are active**" >> "$REPORT_FILE"
    echo '```' >> "$REPORT_FILE"
    echo "$NAT_RULES" >> "$REPORT_FILE"
    echo '```' >> "$REPORT_FILE"
else
    echo -e "${RED}❌ No port forwarding rules found for 76.53.10.36${NC}"
    echo "**Status**: ❌ **Port forwarding rules are NOT active**" >> "$REPORT_FILE"
    echo "**Issue**: No DNAT rules found for 76.53.10.36:80/443" >> "$REPORT_FILE"
    echo "**Fix**: Enable port forwarding rules in UDM Pro Web UI" >> "$REPORT_FILE"
fi
echo "" >> "$REPORT_FILE"

# Firewall Rules Check
echo ""
echo -e "${BLUE}=== Firewall Rules for NPMplus ===${NC}"
cat >> "$REPORT_FILE" << EOF
## 3. Firewall Rules for NPMplus (192.168.11.166)

Checking for ACCEPT rules for 192.168.11.166:80/443

EOF

FW_RULES=$(udm_cmd "sudo iptables -L FORWARD -n -v 2>&1 | grep -A 3 '192.168.11.166'")
if [ -n "$FW_RULES" ]; then
    echo -e "${GREEN}✅ Firewall rules found:${NC}"
    echo "$FW_RULES"
    echo "**Status**: ✅ **Firewall rules exist**" >> "$REPORT_FILE"
    echo '```' >> "$REPORT_FILE"
    echo "$FW_RULES" >> "$REPORT_FILE"
    echo '```' >> "$REPORT_FILE"
    
    # Check if rules are ACCEPT or DROP
    if echo "$FW_RULES" | grep -q "ACCEPT"; then
        echo "**Action**: ACCEPT (✅ Allowing traffic)" >> "$REPORT_FILE"
    elif echo "$FW_RULES" | grep -qE "DROP|REJECT"; then
        echo "**Action**: DROP/REJECT (❌ Blocking traffic)" >> "$REPORT_FILE"
        echo "**Issue**: Firewall is blocking traffic to NPMplus" >> "$REPORT_FILE"
        echo "**Fix**: Change rules to ACCEPT or add allow rules" >> "$REPORT_FILE"
    fi
else
    echo -e "${RED}❌ No firewall rules found for 192.168.11.166${NC}"
    echo "**Status**: ❌ **No firewall rules found**" >> "$REPORT_FILE"
    echo "**Issue**: Firewall may be blocking traffic (default deny)" >> "$REPORT_FILE"
    echo "**Fix**: Add allow rules for 192.168.11.166:80/443" >> "$REPORT_FILE"
fi
echo "" >> "$REPORT_FILE"

# Rule Order Check
echo ""
echo -e "${BLUE}=== Firewall Rule Order ===${NC}"
cat >> "$REPORT_FILE" << EOF
## 4. Firewall Rule Order

Checking if allow rules come before block rules

EOF

RULE_ORDER=$(udm_cmd "sudo iptables -L FORWARD -n -v --line-numbers 2>&1 | head -50")
echo "$RULE_ORDER"
echo '```' >> "$REPORT_FILE"
echo "$RULE_ORDER" >> "$REPORT_FILE"
echo '```' >> "$REPORT_FILE"
echo "" >> "$REPORT_FILE"

# Analysis
cat >> "$REPORT_FILE" << EOF
## 5. Analysis & Recommendations

EOF

# Check for issues
ISSUES=0

if [ -z "$NAT_RULES" ]; then
    echo "### Issue 1: Port Forwarding Not Active" >> "$REPORT_FILE"
    echo "- **Problem**: No DNAT rules found for 76.53.10.36" >> "$REPORT_FILE"
    echo "- **Fix**: Enable port forwarding rules in UDM Pro Web UI" >> "$REPORT_FILE"
    echo "  1. Settings → Firewall & Security → Port Forwarding" >> "$REPORT_FILE"
    echo "  2. Verify rules for 76.53.10.36:80/443 are **enabled**" >> "$REPORT_FILE"
    echo "  3. Save and wait 30 seconds" >> "$REPORT_FILE"
    ((ISSUES++))
fi

if [ -z "$FW_RULES" ] || echo "$FW_RULES" | grep -qE "DROP|REJECT"; then
    echo "### Issue 2: Firewall Blocking Traffic" >> "$REPORT_FILE"
    echo "- **Problem**: No allow rules or rules are blocking" >> "$REPORT_FILE"
    echo "- **Fix**: Add/update firewall rules in UDM Pro Web UI" >> "$REPORT_FILE"
    echo "  1. Settings → Firewall & Security → Firewall Rules" >> "$REPORT_FILE"
    echo "  2. Ensure 'Allow Port Forward...' rules exist" >> "$REPORT_FILE"
    echo "  3. Move allow rules to the **top** of the list" >> "$REPORT_FILE"
    echo "  4. Save and wait 30 seconds" >> "$REPORT_FILE"
    ((ISSUES++))
fi

if [ $ISSUES -eq 0 ]; then
    echo "### Status: ✅ All Rules Appear Correct" >> "$REPORT_FILE"
    echo "- Port forwarding rules are active" >> "$REPORT_FILE"
    echo "- Firewall rules allow traffic" >> "$REPORT_FILE"
    echo "- If external access still doesn't work, check:" >> "$REPORT_FILE"
    echo "  - ISP blocking ports 80/443" >> "$REPORT_FILE"
    echo "  - Network routing issues" >> "$REPORT_FILE"
    echo "  - Test from different network/location" >> "$REPORT_FILE"
fi

echo ""
echo "=========================================="
echo -e "${GREEN}Diagnosis Complete${NC}"
echo "=========================================="
echo ""
echo "Report saved to: $REPORT_FILE"
echo ""