Files
explorer-monorepo/VMID_6000_NETWORK_FIX.md

106 lines
2.1 KiB
Markdown

# VMID 6000 Network Fix - Complete
**Date**: 2026-01-22
**VMID**: 6000 (fabric-1)
**IP Address**: 192.168.11.113
**Status**: ✅ **FIXED** (temporary) | ⚠️ **RESTART REQUIRED** (persistent)
---
## Problem
VMID 6000 was showing "Network is unreachable" after IP reassignment from 192.168.11.112 to 192.168.11.113.
---
## Root Cause
1. **Interface State**: `eth0` was in state `DOWN`
2. **Missing IP**: No IPv4 address assigned to `eth0` (only IPv6 link-local)
3. **No Default Route**: Gateway route was missing
---
## Fix Applied
### Step 1: Bring Interface UP
```bash
pct exec 6000 -- ip link set eth0 up
```
**Result**: Interface is now UP
### Step 2: Assign IP Address
```bash
pct exec 6000 -- ip addr add 192.168.11.113/24 dev eth0
```
**Result**: IPv4 address assigned
### Step 3: Add Default Route
```bash
pct exec 6000 -- ip route add default via 192.168.11.1 dev eth0
```
**Result**: Default route configured
---
## Current Status
### Interface Status
-`eth0` is UP
- ✅ IPv4 address: 192.168.11.113/24 assigned
- ✅ Default route: via 192.168.11.1
### Connectivity
- ✅ Gateway (192.168.11.1): Reachable
- ⚠️ **Note**: This fix is temporary - IP assignment will be lost on container restart
---
## Persistent Fix Required
The IP address assignment is temporary. For a persistent fix, the container needs to be restarted so Proxmox applies the network configuration from `pct config`.
### Recommended Action
```bash
# On Proxmox host (r630-01)
pct stop 6000
pct start 6000
```
After restart, Proxmox will automatically:
- Bring the interface UP
- Assign the IP address (192.168.11.113/24)
- Configure the default route (via 192.168.11.1)
---
## Verification
After restart, verify:
```bash
# Check interface
pct exec 6000 -- ip addr show eth0
# Check routing
pct exec 6000 -- ip route show
# Test connectivity
pct exec 6000 -- ping -c 2 192.168.11.1
```
---
## Summary
**Status**: ✅ **TEMPORARY FIX APPLIED**
- Interface is UP
- IP address assigned
- Gateway reachable
- **Action Required**: Restart container for persistent fix
---
**Next Step**: Restart VMID 6000 to make the network configuration persistent.