fbda1b4beb
Some checks failed
Deploy to Phoenix / deploy (push) Has been cancelled
- ADD_CHAIN138_TO_LEDGER_LIVE: Ledger form done; public code review repo bis-innovations/LedgerLive; init/push commands - CONTRACT_DEPLOYMENT_RUNBOOK: Chain 138 gas price 1 gwei, 36-addr check, TransactionMirror workaround - CONTRACT_*: AddressMapper, MirrorManager deployed 2026-02-12; 36-address on-chain check - NEXT_STEPS_FOR_YOU: Ledger done; steps completable now (no LAN); run-completable-tasks-from-anywhere - MASTER_INDEX, OPERATOR_OPTIONAL, SMART_CONTRACTS_INVENTORY_SIMPLE: updates - LEDGER_BLOCKCHAIN_INTEGRATION_COMPLETE: bis-innovations/LedgerLive reference Co-authored-by: Cursor <cursoragent@cursor.com>
103 lines
3.0 KiB
Markdown
103 lines
3.0 KiB
Markdown
# NPMplus: Verify Running, IP, and Gateway
|
||
|
||
**Last Updated:** 2026-02-05
|
||
**VMID:** 10233
|
||
**Host:** r630-01 (192.168.11.11)
|
||
|
||
---
|
||
|
||
## Expected configuration
|
||
|
||
| Item | Value | Source |
|
||
|------|--------|--------|
|
||
| **Gateway** | 192.168.11.1 | `config/ip-addresses.conf` (`NETWORK_GATEWAY`); UDM Pro / LAN |
|
||
| **Primary IP (eth0)** | 192.168.11.166 | `IP_NPMPLUS_ETH0`; docs (NPMPLUS_HA_SETUP_GUIDE, NPMPLUS_SERVICE_MAPPING) |
|
||
| **IP used by UDM Pro** | 192.168.11.167 | Port forward 76.53.10.36:80/443 → 192.168.11.167:80/443 |
|
||
| **Admin UI** | Port 81 (HTTP) | https://192.168.11.166:81 or https://192.168.11.167:81 |
|
||
|
||
NPMplus can have one or two addresses (.166 and .167); **UDM Pro must forward to .167** for public access.
|
||
|
||
---
|
||
|
||
## Verification script
|
||
|
||
From the repo (requires SSH to r630-01):
|
||
|
||
```bash
|
||
# Copy and run on Proxmox host
|
||
ssh root@192.168.11.11 'bash -s' < scripts/verify/verify-npmplus-running-and-network.sh
|
||
```
|
||
|
||
Or from a machine that has the repo and can SSH to r630-01, use the run-via-proxmox-ssh pattern: copy the script to the host and run it there.
|
||
|
||
**On the Proxmox host directly:**
|
||
|
||
```bash
|
||
# If you are already on r630-01
|
||
bash /path/to/verify-npmplus-running-and-network.sh
|
||
```
|
||
|
||
The script checks:
|
||
|
||
1. **Running** – `pct status 10233` is "running"
|
||
2. **IP(s)** – container has at least one of 192.168.11.166, 192.168.11.167
|
||
3. **Gateway** – default route is 192.168.11.1
|
||
4. **Admin UI** – port 81 responds inside the container
|
||
|
||
---
|
||
|
||
## If the container is stopped or IP/gateway wrong
|
||
|
||
**Fix IP and gateway, then start (recommended):**
|
||
|
||
```bash
|
||
# From repo (copies and runs on r630-01)
|
||
ssh root@192.168.11.11 'bash -s' < scripts/npmplus/fix-npmplus-ip-and-gateway.sh
|
||
```
|
||
|
||
This sets eth0 to 192.168.11.167/24, gateway 192.168.11.1, and starts the container.
|
||
|
||
**Or start only:**
|
||
|
||
```bash
|
||
ssh root@192.168.11.11 "pct start 10233"
|
||
```
|
||
|
||
Wait ~30 seconds for NPMplus (Docker) to start, then run the verification script again.
|
||
|
||
---
|
||
|
||
## If IP or gateway is wrong
|
||
|
||
Correct the container network (run on r630-01). Example for **single interface** with .167 (UDM Pro):
|
||
|
||
```bash
|
||
pct set 10233 -net0 name=eth0,bridge=vmbr0,ip=192.168.11.167/24,gw=192.168.11.1
|
||
pct stop 10233
|
||
pct start 10233
|
||
```
|
||
|
||
Example for **two interfaces** (.166 and .167) if your setup uses both:
|
||
|
||
```bash
|
||
# Set eth0 to .166, add eth1 with .167 (exact syntax depends on Proxmox version and current config)
|
||
pct set 10233 -net0 name=eth0,bridge=vmbr0,ip=192.168.11.166/24,gw=192.168.11.1
|
||
# Add net1 if needed for .167
|
||
pct stop 10233
|
||
pct start 10233
|
||
```
|
||
|
||
After changes, re-run the verification script and confirm UDM Pro port forwarding still points to 192.168.11.167.
|
||
|
||
---
|
||
|
||
## Quick reference
|
||
|
||
| Check | Command (on r630-01) |
|
||
|-------|----------------------|
|
||
| Status | `pct status 10233` |
|
||
| Network config | `pct config 10233 \| grep net` |
|
||
| IPs inside CT | `pct exec 10233 -- ip -4 addr show` |
|
||
| Gateway inside CT | `pct exec 10233 -- ip route show default` |
|
||
| Admin UI (local) | `pct exec 10233 -- curl -s -o /dev/null -w '%{http_code}' http://127.0.0.1:81` |
|